This was actually inspired by one of my C++ Assignments but the program can only be used to calculate GPA in my college because every university or college have their own grading system.
To overcome that, I’ve overhauled the program to accept different grading system.
The user just have to edit the configuration file once and the program will calculate the GPA based on that.
I’ve decided to share my work and I hope it is useful to you.
To show your support, ‘Like’ this website. Thank you.
If you’ve come across any bugs or errors, please email me at [email protected]
I would highly recommend you to read the instructions below.
Extract the .ZIP file
Edit the configuration file “config.txt”
You should never change the name of this file. Keep it as config.txt.
To open, double-click on it and Notepad should appear.
Here, you can change the grading system accordingly.
If desired, you can also add additional grades (such as A+ which is not present in the example below) and delete any unwanted grades.
When done, click on File, then Save. You may close the file now.
Launch the program and enter required inputs
You should get the output as shown above.